Structure
· Suction filter is installed on the existing HTMP-3M-HAVB Pump.
· High efficiency motor can be used for 750,1500W.
Feature
1. It sucks in liquid that penetrates suction filter installed in the upper part of the pump and therefore impure materials cannot enter inside the pump.
2. It is installed directly to pump and therefore no separate wiring connection is necessary.
3 .Replacement and cleaning of filter is simple.
4. Vacuum pressure machine installed on filter body is used to determine when to do filter cleaning.
Dimension
| TYPE | A | B | N-P(PT) |
|---|---|---|---|
| HMTP-204HA(VB/VD) | 83 | 7 | 2-1/2" |
| HMTP-206HA(VB/VD) | 86 | 10 | 2-1/2" |
| HMTP-208HA(VB/VD) | 90 | 14 | 2-1/2" |
| HMTP-210HA(VB/VD) | 93 | 17 | 2-3/4" |
| HMTP-212HA(VB/VD) | 96 | 20 | 2-3/4" |
| HMTP-216HA(VB/VD) | 103 | 27 | 2-3/4" |
| HMTP-220HA(VB/VD) | 109 | 33 | 2-3/4" |
Fiter Cleaning Method
1. Check cleaning period
If the marker in the vacuum pressure machine goes above the red area (-0.006MPa), it is a filter cleaning period. Filter must be cleaned according to the method below and used. If pump operates continuously with the red marker staying in the same location, it becomes a cause for pump or motor damage and therefore period inspection is necessary.
2. Cleaning method
1) Removing oil inside the filter
Used oil inside the filter is removed using short spinning of the pump and air vent.
2) Disassembling filter cap
Use a spanner to disassemble filter cap.
3) Filter disassembling
Disassemble the filter fixed in the filter body.
4) Filter cleaning
Use pressuring air to completely remove impure substances attached to the filter mesh in the disassembled filer.
5) Reassembling
Reassembling occurs in reverse sequence of assembling. In addition, make sure air vent is completely locked before operating.
(If it is open, air can come inside the pump and therefore noise creation and normal operation will not done).
External Figure
204~210HAVBF-(E)
212~220HAVBF-(E)
Dimension
HMTP-3M-□HAVBF
HMTP-3M-□HAVBF-E
| TYPE | A | B | N-P(PT) |
|---|---|---|---|
| HMTP-204HAVB | 83 | 7 | 2-1/2" |
| HMTP-206HAVB | 86 | 10 | 2-1/2" |
| HMTP-208HAVB | 90 | 14 | 2-1/2" |
| HMTP-210HAVB | 93 | 17 | 2-3/4" |
| HMTP-212HAVB | 96 | 20 | 2-3/4" |
| HMTP-216HAVB | 103 | 27 | 2-3/4" |
| HMTP-220HAVB | 109 | 33 | 2-3/4" |
