Internal & External Control Proportional Oil Supply Pump
Feature
1. A product identical in shape to HMGP-105, but with the control box made out of die casting AL to ensure superior durability and resistance against external impacts.
2. The main parts of the pump are integrated to ensure easy repairs and maintenance.
3. Internal control type(HMGP-105D) and External control type(HMGP-105DC, 105W) can be used.
PUMP SPEC
| PUMP SPEC | ||||
|---|---|---|---|---|
| MODEL NAME | HMGP-105D | HMGP-105DC | HMGP-105W | |
| PUMP TYPE | GEAR PUMP | |||
| DISCHARGE PRESSURE | 8kg/cm² | |||
| USING OIL | 32~220(cSt) | |||
| FILTER | 80 Mesh | |||
| TANK CAPACITY | 2Liter | |||
| DISCHARGE AMOUNT | 3~30 / 4~80cc | 100cc/min | ||
| INTERVAL TIME | 3~30 / 300~120min | External control | ||
| FLOAT S/W | Contact type A contact (NO) | |||
| ON at Low level | ||||
| PRESSURE S/W | - | Contact type A contact(NO) | ||
| - | Operation pressure 1.5 ± 0.2 bar ON | |||
| MOTOR SPEC | ||||
| INPUT | 50W | |||
| PHASE | 1Ø | |||
| VOLTAGE | 110V | 200V | 220V | |||
| CURRENT | 1.15A/0.95A | 0.60A | 0.75A/0.50A | |||
| FREQUENCY | 50/60Hz | |||
| PACKING SPEC | ||||
| PACKING SIZE(cm) | 15(W) x 18(L) x 26(D) | |||
| WEIGHT(kg) | PUMP | 2.9 | ||
| PACKING | 2.3 | |||
Components
External Figure
Operating Guide
1. The pump operates once power is connected and electricity is supplied. You can set the pause time using the Interval ① on the front of the pump, and discharge
② to set the operating time (seconds). Afterwards, the pump will repeatedly operate and pause
② to set the operating time (seconds). Afterwards, the pump will repeatedly operate and pause
2. Minimum pause time of the pump is 3 minutes, and the discharge time can be set to 30c (HMGP-105D)
3. When operating the pump, the DIS, lamp ③ switches on, and during the pause, the INT, lamp ④ switches on
4. he MAN ⑤ button can be used for test operations and to let air out from the pipes. (But, do not operate more than 5 minutes, as it can cause motor damage.)
5. The pump is set at 8kg/cm' when released from the factory, but this may differ depending on the changes in the viscosities of the oils used (ail viscosity, surrounding temperature).
Hydraulic circuit drawing
| Wiring Diagram
|
