HSB-30152 Three Phase [3Ø]
- The allowable Tolerance of dimension is ± 5mm.
- The dimension can be changed for improvement without notice
Performance & Specifications
The blower with the name suffix MH (Motor High-efficiency) is designed to run at 60Hz.
| HSB-30152 | |||
50Hz | 60Hz | |||
PHASE |
| 3 | ||
MOTOR | HP | - | 20.0 | |
Kw | - | 15.5 | ||
PRESSURE | mmAq | - | 3000 | |
VACUUM | mmAq | - | 3000 | |
MAX . AIR FLOW | ㎥/min | - | 20.0 | |
CURRENT | 220V | A | - | 52.0 |
380V | A | - | 30.0 | |
SOUND LEVEL | dB(A) | 80 | ||
MATERIAL | IMPELLER | Aluminum | ||
CASING | Cast Iron | |||
BEARING | FRONT | 6308ZC3 | ||
MIDDLE | - | |||
REAR | 6308ZC3 | |||
WEIGHT | Kg | 320 | ||
STARTING CLASS | H | |||
INSULATION CLASS | F | |||
- The performances above were measured under conditions of air temperature 20 °C and atmospheric pressure 1,013mbar.
- The allowable tolerance of the performance value is +10%
- The sound level was measured at a distance of 1.5m with the fully open inlet and outlet ports.
- Anti-corrosive and explosion-proof treatments can be applied upon request.
Performance Curve
- The continuous operation can be made at a point below the curve, however, the continuous operation nearby the rated pressure point may cause a motor breakdown.
In the case of the continuous operation close to the rated pressure, it is strongly recommended to use the pressure-relief valve. See accessories, page 61.
- The allowable tolerance of the performance value is ± 10%
