Sea Water Source Heat Pump

* Product Overview

An eco-friendly heat pump system that recovers sensible heat from the sea water and supply the recovered heat to the heat/cool the water tank, or produce cold/hot water without using any fossil fuel thereby saving energy and reducing greenhouse gas

* Features

① Significantly saving energy costs associated with heating and cooling of the water tank at eel farms and aquaculture farms
② Maintaining the optimum temperature by accurate temperature control for the growth of the young and live fishes
③ Extended equipment life and easy maintenance with the titanium dual pipe and spiral tube heat exchanger
④ Fitted with the aerification system to the heat source tank so as to generate air bubbles to remove sludge and optimize the heat transfer of the evaporator
⑤ Ability to recover heat even from the low temperature heat source (up to 5°C)

* Application

Applicable to any sector that uses sea water as a heat source and requires hot water and heating/air-conditioning such as Land aquaculture, Mariculture, Offices near the sea shore, Commercial buildings, Motel, Sauna and so on

* Specification ofSea Water Heat Source Heat Pump (IWSK-55C, 53C series)

Model			IWSK-55C-54	IWSK-55C-59	IWSK-55C-64	IWSK-53C-55	IWSK-53C-70	IWSK-53C-75
KITECH			IJS-50SES	IJS-SD200	IJS-SD230	IJS-SDW195		IJS-56SDW
Capacity	Heating	KW	189.1	205.69	224.9	192.9	244.23	261.86
		USRT	53.78	58.5	63.96	54.86	69.46	74.47
	Cooling	KW	172.5	190.67	211.4	120.4	187.04	207.5
		USRT	49.06	54.22	60.12	34.24	53.19	59.01
	Heating/cooling	KW	29.10/37.07	29.78/38.77	38.90/48.17	30.68/34.10	38.38/45.73	37.94/40.95
Power Supply			3Phase x 380V x 60Hz
Refrigeration Cycle			Single		Dual	Single	Dual	Single
Dimension	Length	mm	2,600	2,600	2,600	2,600	2,600	2,600
	Height		1,870	1,870	1,870	1,870	1,870	1,870
	Depth		1,900	1,900	1,900	1,900	1,000	1,000
Compressor	Type & Quantity		Screw x 1
	Driving Method		Y-Δ
	Volume Control	%	0~100%
	Refrigeration Ton	RT	17.35				19.38
Refrigerant	Type		R-407C
	Control Method		Thermostatic expansion valve
Heat Exchanger at Load-side	Type		Coaxial type
	Circulation Volume	LPM	500	600	600	500	Heating:750	800
							Cooling:600
	Piping(IN/OUT)	A	100
Heat Exchanger at Heat source-side	Type		Coaxial type			Titanium Tube type
	Circulation Volume	LPM	600	700	700	600	Heating:850	800
							Cooling:800
	Piping(IN/OUT)	A	100			80/150
Control	Temperature Control		4way proportional control valve
	Operation Control		PCB
Weight		kg	1,600	1,700	1,700	1,500	1,200	1,600
Requirements for certified product		heating	Inlet of heat exchanger at load-side to be 15°C; Inlet of heat exchanger at heat source-side to be 15°C
		cooling	Inlet of heat exchanger at load-side to be 25°C; Inlet of heat exchanger at heat-source-side to be 25°C

■ The above performance data have been obtained from an official certification institution (KITECH), and may vary depending on the conditions of the installation site.