1. Description
○ Video UTP Receiver enables to send video signals from Video Transmitter
(MVUT-100) through UTP to Composite Video signals.
○ Video Output supports NTSC/PAL. UTP Cable used CATEGORY 5,5E,6 types.
Transmitter and receiver are needed to be connected point-to-point and
controlled RS-485 signal for PAN/TILT through UTP cable so it’s not necessary
to install extra cable.
○ MVUR-100 can be controlled from the distance of 250m, 500m, 750m, and 1000m
by 4Ch DIP switch, gain terminal helps to realize clear video quality.
2. Panel Drawing
3. Specification
○ General Part
- Input : Balanced Differential Signal, 100Ω, RJ-45
- Output : 1 Vp-p Composite Video, 75Ω NTSC/PAL, BNC Connector
- AUX Input / Output Port : Control Data or Stereo Unbalanced Audio, WAGO
Connector
- Cable : Unshielded Twisted Category 5,5e,6 AWG24-4P
- Internal Operation Frequency : 130MHz, -3dB
- Internal Distortion : 60dB@5MHz
- Differential Phase Error : 0.04 Degree NTSC, 150Ω
- Operating Temperature Range : -40℃ ~ +85℃
- Internal Power Dissipation : Max 600mW
- Humidity Range : 0% ~ 90%
○ Case Part
- Weight : 200g
- Dimensions : 68(W) * 78(H) * 25(D) mm
