1. Description
○ This equipment is used for transmitting high resolution analog SXGA(1280 x 1024)
RGB signals up to 100 meter with high resolution quality by using the Category
5.5E,6(UTP) cable.
○ You can also use it, setting one between audio(mono) signal and data signal in
advance by using Category 5.5E,6(UTP) cable.
○ As transmitting equipment, MRU-100T is used for transmitting up to 100 meter.
○ As receiving equipment, MRU-100R restores the signals received far from
MRU-100T through UTP line.
○ It includes Gain and EQ function for adjusting received signals, and it also has
function for adjusting each color delay line.
○ Having one port for distributing function, MRU-100T can be monitored previous
transmitted condition. Audio and data selecting switcher are attached on the front
panel.
2. Panel Drawing
3. Specification
○ Transmitter / MRU-100T
- Input signal : 1 analog input RGBHV, RGBS, RGsB
- Loop output : 1 analog output RGBHV, RGBS, RGsB
- Connector type : Input 1 15pin HD female, monitor 1 15pin HD female, output 1
RJ-45
- Audio or Data Input /Connector : mono unbalanced / stelvio or RS-485 data /
stelvio
- Bandwidth : 350MHz
- Power input : DC 9V 850mA (Power adaptor)
- Dimension : 150(W) * 26(H) * 100(D) mm
○ Receiver / MRU-100R
- Input signal : 1 analog input RGBHV, RGBS, RGsB
- Connector type : input 1 RJ-45, output 1 15pin HD female
- Audio or Data output /Connector : mono unbalanced / stelvio or RS-485 data /
stelvio
- Bandwidth : 350MHz
- Power input : DC 9V 1A (Power adaptor)
- Dimension : 150(W) * 26(H) * 100(D) mm
