1. Description
○ This device enables to route 3 Analog Audio and R, G, B, HD, VD Video input
signals to 1 output signal and 1 monitoring output signal.
○ Enable to control input/output by front control key. A rear panel RS-232C control
port provides remote control function
○ Memory back-up function helps to memorize the last status while it is turned off.
○ LED Switch enables to check status of the selection.
○ LED Switch enables to check status of the Remote Control selection.
2. Panel Drawing
3. Specification
○ Video Part
- Input/Output number : 3 x 1
- Input/Output type : RGBHV
- Input/Output connector : d-sub 15pin
- Input/Output level : analog RGB : 1.2Vp-p Max, H-Sync, V-Sync : TTL level
- Input/Output impedance : 75Ohm ± 1%
- Bandwidth : 600 MHz (-3 dB), fully loaded
○ Audio Part
- Input/Output number : 3 x 1
- Input/Output type : balanced Stereo
- Input/Output connector : Wago
-Max level : 21dBm
- Input/Output impedance : 600Ohm
- Frequency response : ±0.1dB(20Hz ~ 20kHz)
- Crosstalk/Noise level : -80 dB Min/ - 83dB
○ Remote Control Part
- Serial control : 1 RS-232, D-sub 9pin connector
○ Case 및 Power Part
- Power source : DC 12V 1A (Power Adaptor)
- Temperature : 0℃ ~ 40℃
- Type : desk type
- Dimensions : 280(W) * 44.5(H) * 150(D) mm
