1. Description
○ This is a remote camera control unit to control power supply of camera, lens
and pan/tilt in a near location.
○ Controlled via front switches, built-in correspondent ports enable to control
operating soft ware.
○ The front LED panel enables easy view of the operating status.
2. Panel Drawing
3. Specification
○ General Part
- Camera control port : 1 Port (Pan/Tilt, Lens, Power Control)
- CPU : 8 Bit Micro Processor 89C52
- Clock : 11.0592 MHz
- Connector : D-Sub 9 Pin Female
- Communication : Serial RS-232C 1Ch, Baud 9600, N, 8, 1
- Watch dog diagnostic
- Lens control : ±6V - ±12V (±12V Setting)
- Pan/Tilt control : AC 24V – 220V (24V Setting)
- Input cord : 3 Pin GND svp
○ Case & Power Part
- Power source : AC 220V/60Hz
- Temperature : 0℃ ~ 40℃
- Power consumption : Below 70Watt
- Type : 19” Rack Type
- Dimensions : 483(W) * 89(H) * 300(D) mm
