1. Description
■ This device enables to route 10 audio/video input signals to 10 audio/video output.
■ Enable to control input/output by front control key. A rear panel RS-232C control port
provides remote control function.
■ Memory back-up function helps to memorize the last status while it is turned off.
■ PGM/CALL function enables to save and operate A/V status.
■ Monitoring ports are available to monitor output mode when input modes are selected and
the front display panel enables easy monitoring of input and output modes.
■ The front LCD panel with switch buttons enables easy view of inputs and outputs.
■ Sync hronized terminal enables to sync to the output signal and remote communication
status can be monitored through LED.
2. Panel Drawing
3. Specification
■ Audio Part
- Input/Output number : 10 x 10
- Input/Output type : Unbalanced stereo, 600ohm
- Input/Output connector : RCA
- Max level : 14dBm
- Frequency response : ±0.1dB(20Hz ~ 20kHz)
- Crosstalk : below 80dB
- S/N : below 70dB (20Hz ~ 20kHz)
■ Video Part
- Input/Output number : 10 x 10
- Input/Output type : Composite video 1Vp-p, 75ohm
- Input/Output connector : BNC
- Bandwidth : 100 MHz (-3 dB), fully loaded
- Frequency response : ±0.1dB(750KHz ~ 4.7MHz)
- Differential phase error : 0.5°
- Differential gain error : 0.5%
- Crosstalk : below 60dB
- Sync : Standards, BNC, 75ohm
■ Remote Control Part
- Serial control : 1 RS-232, d-sub 9pin connect
■ Case & Power Part
- Power source : AC 85 ~ 240V 50 ~ 60Hz
- Temperature : 0℃ ~ 40℃
- Power consumption : below 25Watt
- Type : 19” Rack type
- Dimensions : 483(W) * 89(H) * 300(D) mm
