SDH-KP SERIES
- 1500SPM high speed knuckle press
- The structure design realized optimum balance - Stroke-variable type press
- Stroke can be adjusted dependent on use or purpose - High degree of precision
- Adopted bearing with high hardness and high degree of precision
- Improved degree of precision by applying linear bearing on slide guide Decreased noise and extended mold life - Decreased noise and extended mold life
- - Decreasing speed at molding section reduced noise and extended mold life - Improved degree of precision and reinforced frame hardness by double knuckle structure made of H-type casting frame
- Minimized cumulative gap at slide driving part by applying hydraulic pressure screw type
SDH-KP Specification
| model Item | unit | SDH-15 KP | SDH-60 KP | SDH-100 KP | |||||
|---|---|---|---|---|---|---|---|---|---|
| Capacity | Ton | 15 | 60 | 100 | |||||
| Stroke | mm | 15~25 | 30 | 80 | 50 | ||||
| Stroke Per Minute | S.P.M | 300 ~ | 100 ~ | 90 ~ | 50 ~ | ||||
| 1500 | 350 | 120 | 100 | ||||||
| Die Height | mm | 210 | 310 | 285 | 320 | ||||
| Slide Adjustment | mm | 20 | 50 | 50 | |||||
| Slide Area | mm | 340x300 | 520x310 | 850x550 | |||||
| Bolster Area | mm | 400x370 | 860x520 | 900x500 | |||||
