The characteristics of SDH-FIN SERIES
- Crank shaft bearing for higher rigidity and precision
- Main motor is controlled by inverter system Compressed air supply to Clutch & Brake unit
- It is possible to easily repair fin die with Slide open Mechanism
- Hitch lever is provided with hydraulic clamping system
- Oil pump group for slide clamping overload protector
SDH-FIN SERIES Specification
| model | unit | SDH-45F | SDH-60F | SDH-80F | SDH-100F | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| Item | ||||||||||
| Capacity | Ton | 45 | 60 | 80 | 100 | |||||
| Stroke | mm | 40 | 50 | 40 | 50 | 40 | 40 | |||
| Stroke Per Minute | S.P.M | 120 ~ | 120 ~ | 150 ~ | 150 ~ | |||||
| 400 | 300 | 400 | 300 | 300 | 300 | |||||
| Die Height | mm | 240 | 270 | 270 | 300 | |||||
| Slide Adjustment | mm | 30 | 30 | 30 | 30 | |||||
| Slide Area | mm | 680 x 720 | 880 x 900 | 1060 x 1300 | 1260 x 1300 | |||||
| Bolster Area | mm | 740 x 1300 | 950 x 1500 | 1200 x 2000 | 1400 x 2000 | |||||
| Slide Open Device | mm | 80 (D.H. 240) | 80 (D.H. 270) | 80 (D.H. 270) | 80 (D.H. 300) | |||||
