A soot blower is system that effectively removes ashes or other attachments piled on the surface in contact with combustible gas such as boilers, fired heaters and other heat exchange devices.
Use of soot blowing contributes to enhancing heat efficiency and increasing the rate of facility operations. Soot blowers are needed by such facilities as power plant boilers, urban and industrial waste management facilities, fire heaters, denitrification facilities and desulfurization facilities.
Long Retractable Soot Blower
Designed to operate perfectly under High temperature gas path of boilers and other facilities. It is widely used at boilers and other heat exchangers.
- Make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Low noise operation with an enclosed reducer and carriage
- Lance tube selects proper materials for installation and operation conditions.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
Rotary Soot Blower
Element tube has to be installed in gas path at all times because gas temperatures of boilers and other facilities are low.
(Ex. :Evaporator tube, economizer, tubular air, pre heater, fired heater, etc.)
Element tube is made by proper materials at gas zone temperature and have lots of nozzles clean the whole gas path depending on arrangement of boiler tube.
A single motor enable the element tube to rotate.
It also operates the cam parts and is feasible to open and close of poppet valve.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common.
