The Micro Finishing Machine that processes Crank Shaft and Cam Shaft is processed with tape (Film / Paper). (When we use tape, we call it Lapping Machine.)
Daeyoung's Lapping Machine is a leading-edge system with many improvements. We are constantly researching and developing to improve productivity by easy maintenance and minimizing the tape replacement time.
The workpieces (crankshaft or camshaft) are placed between the center of the headstock and the tailstock that rotate and vibrate. Then, the tape-wrapped shoe is used.
Lapping Machine For Crank Shaft (Vertical Type)
DCR-V Series processes journal, pin, flange parts of crank shaft. The arm with shoe is installed above and below.
Machining Area Journal, Pin, Oil seal, Flange
Drive Drive-Pin
Spindle Gear-Box (Worm & Worm wheel)
Oscillation Eccentric Cam type
Lapping Machine For Crank Shaft ( Horziontal Type )
The DCR-H Series processes the journal, pin, and flange parts of the crank shaft. The arm with shoe moves horizontally back and forth.
Machinng Area Journal, Pin, Oil seal, Flange
Drive Drive-Pin
Spindle Servo
Oscillation Servo (Flexibility)
Lapping Machine For Cam Shaft ( Vertical Type )
The DCA-V Series processes the Journal and Cam parts of the Cam shaft. The arm with shoe is installed above and below.
Machinng Area Journal, Cam, Oil seal
Drive Drive-Pin or Chuck
Spindle Geared motor
Oscillation Eccentric Cam type
Lapping Machine For Cam Shaft ( Horizontal Type )
The DCA-H series processes the Journal and Cam parts of the cam shaft. The arm with shoe moves horizontally back and forth.
Machining Area Journal, Cam, Oil seal
Drive Drive-Pin or Chuck
Spindle Servo
Oscillation Servo
