SM Finishing Materials
Channel Steel 1(SM-41)
Hot dip galvanized channel steel frame of 1000 g/㎡ (HDG plus) is subjected to tuning & cutting processing after zinc coating processing prior to rolling processing. It shall comply with S235 JR of DIN EN 10025 specification. In general, zinc coating shall be based on 1000 g/㎡
| Channel Steel | Weight (kg/m) | Allowed Moment (N`m) | Thickness of raw material(mm) | Finishing Material |
| 209 | 580 | 2.7 | HDG Plus |
Channel Steel 2 (SM-41D)
Hot dip galvanized channel steel frame of 1000 g/㎡ (HDG plus) is subjected to tuning & cutting processing after zinc coating processing prior to rolling processing. It shall comply with S250 GD of DIN EN 10147 specification. In general, zinc coating shall be based on 1000 g/㎡.
| Channel Steel | Weight (kg/m) | Allowed Moment (N`m) | Thickness of raw material (mm) | Finishing Material |
| 209 | 580 | 2.7 | HDG Plu |
Channel Beam Loading Data
Load-related factors of channel steel beam as a function of static loading conditions
Load data of all beams is related to a single-span (simple) beam supported at ends. This data can be utilized in most cases.Concerning what phenomena occur under other different load 7 support conditions, there are also the cases requiring confirmation. Some general cases are shown below. Shown are the values where values in the beam load table & the following factors are simply multiplied.
Channel Steel 1 (SM-41) : Span (mm) 250~6,000
