IMPELLER
SIM model series
THE HIGH-PERFORMANCE DIRECT DRIVEN STIRRER WITH ITS ADVANCED FEATURE AND USER-FRIENDLY DESIGN
Specification
| IMPELLER NO | SHAFT SIZE(ø) | SHAFT LENGTH(MM) | SHAFT SIZE(ø) |
| SIM-1 | 8 | 350 or 450 | 40 |
| SIM-2 | 50 | ||
| SIM-3 | 40 or 60 | ||
| SIM-4 | 450 | 90 | |
| SIM-5 | 70 | ||
| SIM-6 | 100 | ||
| SIM-7 | 60 or 90 | ||
| SIM-8 | 80 | ||
| SIM-9 | - | 65 | |
| SIM-10 | - | 75 | |
| SIM-11 | - | 90 | |
| SIM-12 | There are differences according to customers’ orders (customized products) | ||
| SIM-13 | |||
| SIM-14 | |||
| SIM-15 | |||
| SIM-16 | |||
| TEFLON SEAL NO | SIZE |
| TS -1 | 24 / 40 |
| TS -2 | 29 / 42 |
| TS -3 | 34 / 45 |
※Specifications are subject to change for improvement in the quality of our products.
Usage
Impeller : The most suitable device that transmits power of a stirrer to liquid through stirring energy.
→ Direct Driven Stirrer, the excellent product developed by our company is used together.
DIRECT DRIVEN STIRRER STAND BASE
H, U Type
THE HIGH-PERFORMANCE DIRECT DRIVEN STIRRER WITH ITS ADVANCED FEATURES AND USER-FRIENDLY DESIGN
Products Type
| TYPE | H-TYPE | U-TYPE |
| Height(mm) | 900 | 820 |
| Weight(kg) | 12 | 6.8 |
※Specifications are subject to change for improvement in the quality of our products.
Usage
It is used for installing the stirring device and other auxiliary devices.
Special Features
Shakes are eliminated due to a stable structure and weight.
Gap control is possible with the H-type, which facilitates using a large capacity
DIRECT DRIVEN STIRRER
BEST DS, DSS, DSH model series
THE HIGH PERFORMANCE DIRECT DRIVEN STIRRER WITH ITS ADVANCED FEATURES AND USER-FRIENDLY DESIGN
Specifications
| Model | USE | MOTOR TYPE / RPM RANGE | RPM INDICATOR | INPUT VOLTAGE |
| DS-90D | Middle / High viscosity | DC 90Watts Geared Motor 50∼1,000max | Digital Display | 115V or 230V |
| DS-90 | Middle / High viscosity | DC 90Watts Geared Motor 50∼1,000max | - | |
| DS-70D | Middle viscosity | DC 70Watts Geared Motor 50∼1,000max | Digital Display | |
| DS-70 | Middle viscosity | DC 70Watts Geared Motor 50∼1,000max | - | |
| DSS-20 | Middle viscosity | DC 50Watts Geared Motor 50∼1,000max | - | 115V or 230V 50/60Hz |
| DSS-20D | Middle viscosity | DC 50Watts Geared Motor 50∼1,000max | Digital Display | |
| DSS-20W | Middle / High viscosity | DC 120Watts Geared Motor 50∼1,000max | - | |
| DSS-20DW | Middle / High viscosity | DC 120Watts Geared Motor 50∼1,000max | Digital Display | |
| DS-10 | Low viscosity | DC 30Watts Geared Motor 50∼4,000max | - | |
| DS-11 | Low viscosity | DC 50Watts Geared Motor 50∼3,000max | - | |
| DS-11D | Low viscosity | DC 50Watts Geared Motor 50∼3,000max | Digital Display | |
| DS-41 | Low / Middle viscosity | DC 100Watts Geared Motor 50∼3,000max | - | |
| DS-41D | Low / Middle viscosity | DC 100Watts Geared Motor 50∼3,000max | Digital Display | |
| DSH-10D | Low viscosity | DC 200Watts Geared Motor 50∼11,000max | Digital Display | 100V or 115V 50/60Hz |
| DSH-10 | Low viscosity | DC 200Watts Geared Motor 50∼11,000max | - |
※Specifications are subject to change for improvement in the quality of our products.
Usage
The excellent device to stir and mix between various liquids, between a liquid and a solid, or powders.
Emulsifying, blending, dispersing, etc of chemical, pharmaceutical, food and cosmetic products.
Special Features
pm can be arbitrarily set, as a stepless electronic speed controller is installed.
The equipment basically consists of a body, chuck, chuck handle, stainless steel bladed propeller(option), clamp(option), and a U-type stand(option).
DSS-20 / DSS-20D
A stir bar that can be used with a chuck has the dimension of ø1~10mm(millimeters).
For the convenience of experimentation, the stir bar is designed to be able to move up and down.
A geared DC motor(50Watts) is used to produce a high output at low speeds.
Digital display renders an accurate measurement of the rpm.(SS-20D).
An overload lamp is installed to protect the equipment from overloading.(SS-20D).
DSS-20W / DSS-20DW
A stir bar that can be used with a chuck has the dimension of ø1~10mm(millimeters).
For the convenience of experimentation, the stir bar is designed to be able to move up and down.
A geared DC motor(120Watts) is used to produce a high output at low speeds.
Digital display renders an accurate measurement of the rpm.(SS-20DW).
An overload lamp is installed to protect the equipment from overloading.(SS-20DW).
DS-10
A stir bar that can be used with a chuck has the dimension of ø1~10mm(millimeters).
DS-41 / DS-41D
A stir bar that can be used with a chuck has the dimension of ø1~10mm(millimeters).
For the convenience of experimentation, the stir bar is designed to be able to move up and down.
A large quantity of sample can be stirred as a 100Watts DC motor is used.
Digital display renders an accurate measurement of the rpm.(S-41D).
Integrated Controller type and disintegrated Controller type are avilable.(S-41D).
DS-11 / DS-11D
A stir bar that can be used with a chuck has the dimension of ø1~10mm(millimeters).
For the convenience of experimentation, the stir bar is designed to be able to move up and down.
Digital display renders an accurate measurement of the rpm.(S-11D).
Integrated Controller type and disintegrated controller type are avilable.(S-11D).
DSH-10 / DSH-10D
Products have low viscosity, so an exclusive impeller must be used for each product. → An exclusive impeller(Model No : SIM-3 or SIM-2) is basically provided.
For the convenience of experimentation, the stir bar is designed to be able to move up and down.
Digital display renders an accurate measurement of the rpm.(SH-10D).
