◆ Desciption
The Auto Quenching Press quenches Diaphragm spring products processed In the press ad marks Lot on. On them
◆ Main Specification
| MODEL | T / R TYPE | ||
| WORK SIZE | Φ165 ~ Φ310 | ||
| C/TIME | 36 SEC/EA | ||
| PROCESS | WORK LOAD'G PART | AUTO LOAD'G (AIR CYL' & HYD' CYL' TYPE) 2.GRIPS the work with a magnet and move it to mark`g position and T/R feed unit to unload. |
-Magenet -AIR CYL' -HD CYL' -BALL BUSH UNIT |
| MARK'G PART |
1. AUTO marking stage. At the verificaton for overlap, lot no shall be marked |
-AIR CYL' -HD' CYL' -Others |
|
| T/R FEED'G UNIT | 1. AUTO (SERVO) ①At the receipt of works in the AUTO LOAD'G Unit it shall be moved to Wheel Drive Unit. (Queching Furnace) ②Moves work from WHEEL DRIVE UNIT (Quench Furnace) to Quench press) |
-Linear Unit (samik) -SERVE UNIT -at equipment selection, T/R FEED'G STROKE changes automaticalty |
|
| QUENCH'G FURNACE | 1.AUTO (WHEEL DRIVE TYPE) 2.Turn work after mounting on Wheel Drive Electrical Heater Type (Methanol, Nitrogen) |
-WHEEL DRIVE UNIT(1/48) -Electrical heater -TORQUE LIMIT |
|
| QUENCH'G PRESS UNIT |
1.AUTO (Hydraulic PRESS) 2.QUENCH'G PRESS |
-Mold CLAMP'G UNIT -HYD'CYL -Cooking Water Line |
|
| AUTO LOAD'G PART | AUTO SERVO TYPE (QUECH'G PRESS -> T/R UNIT WORK) |
-Linear Unit (B/K TYPE) TURN'G UNIT |
|
| TEMPER'G FURNACE |
1.AUTO (WHEEL DRIVE TYPE) (TEMPER'G AFTER WARM SETT'G 2.After mounting work on WHEEL Drive, Turning. 3.Eletrical heater 4.inner circulation cy fan blow |
-WHEEL DRIVE UNIT (1/96) -Electrical Heater(36kW) -FAN BLOWER -T/FORMER : 50KVA -Vibration prevention |
|
| PRESS UNIT | 1.AUTO (Hydraulic PRESS) 2.WARM setting after Tempering |
-HYD'CYL -WORK Thickness -Detection SENSOR |
|
| AUTO UNLOAD'G PART | 1.AUTO (SERVO TYPE) 2.Mount work from press to unloading table |
-Linear UNIT | |
◆ Drawing
