Mechanical 500 Ton Compacting Press

SAM WON Mechanical 500 Ton Compacting Press SW-500-MC

Model NO.

SW - 500 - MC

Specifications

ADJUSTABLE PRESSING FORCE	500 Ton
ADJUSTABLE EJECTION FORCE	250 Ton
FILLING HEIGHT	150 ㎜
UPPER RAM STROKE	200 ㎜
EJECTION STROKE	100 ㎜
UPPER PUNCH AIR CUSHION	130 ㎜
UPPER PUNCH ADJUSTMENT	150 ㎜
FLOAT PUNCH EJECTING STROKE	30 ㎜
DIAMETER OF COMPACT	φ120 ㎜
UNDER & OVER FILL STROKE	7.5 ㎜
STOPPER CAPACITY	250 TON
STROKE PER MINUTE(S.P.M.)	6~24 S.P.M.
WORKING AIR PRESSURE	5~7 ㎏/㎠
MAIN MOTOR	38 ㎾
CLUTCH & BRAKE	COMBINATION TYPE
COMPRESSION INDICATOR	DIGITAL
LUBRICATION	SEALED OIL BATH TYPE
OVERLOAD PROTECTION	ELECTRO-HYDRAULIC SENSOR
SAFETY SYSTEM	PHOTO ELECTRONIC (PHOTO CELL)
HOPPER CAPACITY(APPROX.)	100 ℓ
POWER SUPPLY	220 Volt, 60Hz, 3 Phases
NET WEIGHT(APPROX.)	60 TON
DIMENSION (APPROX.)	8200(H)×3239(W)×2700(D)

Features

• The crank type mechanism of the machine provides strong power with high accuracy and consistent pressing force.

• Main drive system served by centralized oil bath system ensures long life operation and few mechanical trouble.

• Using Ejection Position Constant system that ejection position is always the same regardless of filling height can make the operation and handling more easier.

• Unique floating die pressing system and stopper design ensures accruate and uniform density balance.

•The use of the C-type tool holder (die set)can produce parts of uniform density with five steps, upper 2 steps and lower 3 steps.

•All handles and gauges to control can be operated by motor and the digital counter on control panel.