Mechanical 250 Ton Compacting Press

SAM WON Mechanical 250 Ton Compacting Press SW-250-MC

Model NO.

SW - 250 - MC

Specifications

ADJUSTABLE PRESSING FORCE	Max.250 Ton
ADJUSTABLE EJECTION FORCE	Max.125 Ton
FILLING HEIGHT	Max.150 ㎜
UPPER RAM STROKE	200 ㎜
EJECTION STROKE	Max.100 ㎜
UPPER PUNCH AIR CUSHION	130 ㎜
UPPER PUNCH ADJUSTMENT	100 ㎜
FLOAT PUNCH EJECTING STROKE	Max.±10 ㎜
DIAMETER OF COMPACT	Max.φ120 ㎜
UNDER & OVER FILL STROKE	7.5 ㎜
STOPPER CAPACITY	125 TON
STROKE PER MINUTE(S.P.M.)	6~24 S.P.M.
WORKING AIR PRESSURE	5~7 ㎏/㎠
MAIN MOTOR	37 ㎾×6P
CLUTCH & BRAKE	COMBINATION TYPE
COMPRESSION INDICATOR	DIGITAL
LUBRICATION	SEALED OIL BATH TYPE
OVERLOAD PROTECTION	ELECTRO-HYDRAULIC SENSOR
SAFETY SYSTEM	PHOTO ELECTRONIC (PHOTO CELL)
HOPPER CAPACITY(APPROX.)	60 ℓ
POWER SUPPLY	220 Volt, 60Hz, 3 Phases
NET WEIGHT(APPROX.)	44 TON
DIMENSION (APPROX.)	7700(H)×3500(W)×2800(D)

Features

• The crank type mechanism of the machine provides strong power with high accuracy and consistent pressing force.

•Main drive system served by centralized oil bath system ensures long life operation and few mechanical trouble.

•Using Ejection Position Constant system that ejection position is always the same regardless of filling height can make the operation and handling more easier.

•Unique floating die pressing system and stopper design ensures accruate and uniform density balance.

•The use of the C-type tool holder (die set)can produce parts of uniform density with five steps, upper 2 steps and lower 3 steps.

•All handles and gauges to control can be operated by motor and the digital
counter on control panel.