– ‘RS232 to RS422/RS485’ and ‘RS422/RS485 to RS232’ Converter
– Distance: Max. 1.2km
– 3kV Isolation(All ports) and 15kV Surge Protector(RS422/485)
– Communication speed up to 921.6kbps
– Supplied models AC or DC power available
– External power requirement: 10~30V DC
– Communication status can be checked LEDs
– RS422/RS485 mode selectable by external switch
– Max. 32 Devices Connectable for RS422 Multi-Drop Mode
– Max. 32 Devices Connectable for RS485 Mode
CS-428i converts RS232 signals to RS422 or 485 with enhanced 3KV optical isolation protection for industrial environments. It is a fast and efficient solution to overcome distance limitations of RS232 or for connecting to industrial devices with an RS422/485 interface.
No additional software is required for operation. With an easily accessible DIP switch you can configure the interface for RS422 or RS485. The CS-428i operates at speeds up to 921.6Kbps
What is Isolation?
When an electrical shock caused by power or ground is passed on to the system it can cause severe, if not irrecoverable damage. This can be prevented by using Opto-Isolation. In addition, isolation has other benefits by reducing problems caused by signal distortion and signal line impedance matching.
Opto-Isolation
The CS-428i Opto-Isolation protects up to DC 3KV between RS232 and RS422, RS485 sides. Opto-Isolation perfectly isolates the two endpoints so devices are protected from unfavorable electrical conditions such as ground potential differences, lightning and line interference. This results in more stable and reliable communications.
