IAQ-700 is a high accuracy indoor air quality monitor, which measure VOC. CO2, Temperature, Humidity and dust.
Through large size of graphic LCD, it provides real-time monitoring and can transmit data wirelessly through built in ZigBee.
After install indoor Watch (software), it enable to collect data at a long distance.
Relay Contact make it possible to interwork with a ventilating system.
It has been installed to measure Air quality of indoor or underground spaces like Factories, schools, Public places etc.
[ Features ]
ㆍ Multi Gas Measurement
Measurement of VOC, CO2, Dust, Temperature and humidity at the same time.
ㆍ ZigBee wireless communication
Can reach max 1.2Km in case of non-obstacle.
ㆍ Real time storage of data
‘Indoor Watch’ program enable to transmit data in real time at a long distance
ㆍ Digital Process
Measurement of VOC, CO2, Dust, Temperature and humidity at the same time.
ㆍ LCD Display with Back-Light
ㆍ Relay Signal-Output
Provide 2 Step-Relay Contact and interwork with a ventilating system
[ Specification ]
Segment | Specification | |
VOC | Detection principle | Semiconductor or PID |
Measurement range | 0 ~ 1000 ppm | |
Resolution | 1 ppm | |
Accuracy | £ ±3%/Full Scale | |
Response time | within 20 seconds, 90%/full scale | |
CO2 | Detection principle | NDIR |
Measurement range | 400 ~ 10,000 ppm | |
Resolution | 10 ppm | |
Accuracy | ≤2% /full scale | |
Response time | Within 30 sec (T90) | |
DUST | Detection principle | Light Scattering |
Measurement range | 0 ~ 500 ㎍/㎥ | |
Resolution | 1 ㎍/㎥ | |
Accuracy | £ ±3%/Full Scale | |
Response time | Within 10 sec (T90) | |
Temperature | Detection principle | Thermister |
Measurement range | -25 ~ 60 ℃ | |
Resolution | 0.2 ℃ | |
Accuracy | £ ±2%/Full Scale | |
Response time | Within 10 sec (T90) | |
Humidity | Detection principle | Thin Film electronic capacity |
Measurement range | 0 ~100%RH | |
Resolution | 0.4% RH | |
Accuracy | £ ±3%/Full Scale | |
Response time | Within 15 sec (T90) | |
Communication | ZigBee | |
Input power | DC9V ~ DC24V | |
Density Display | 320×240 DOT Graphic LCD Display | |
Alarm Display | AL-1,AL-2 LED(RED) | |
Alarm Output | 2 Step RELAY CONTACT | |
Operation Temperature | -10℃ ~ 70℃ | |
Operation Humidity | 5 ~ 95%RH (Non-Condensing) | |
Installation | Wall Mounting Type | |