Specifications

Use : Tape indent length printer
applicable : Cable dia below 70mm
Printing type : Heating tape stamp printing
Line speed : Max. 50m/min
Line center height : 1,000mm
Counter set : 2.5×4 digits
Counter reset : By air cylinder
Main wheel : 318mm
Tape : Al coating tape, 10×150mm(about 900m)
Tape reduction : Tape backup ass'y
Accuracy of length : Less than 3%
Drive : Torque motor control
Power/pneumatic source : AC 220V 50/60Hz 2Ph, min 5.0 psi
Lay out dimension : W 950, B 600, H 1,900mm

Option

1. Caster or Rail
2. Counter set(for Lot No.) : 2.5mm × 4 digits
3. Segment type(metal)
4. 2 feet marking system
5. Under roll : "U"-shape roller

Diagram