Sluice (Rectangular Type) Gate

A large size square sluice gate with outside steam screw, Controlled by a headstock, operated by handwheel, hydraulic, oil pressure cylinder or electric motor. An extra large size version is available with duplex headstock 

  
Specifications 

 
  1. Size 
    Nominal size : 200mm~4,000mm 
  2. Fluid 
    Service water, sewage, sea water etc. 
  3. Working Pressure 
    14psi(10mAq) 
  4. Main Material 
    *Body : Cast iron (GC200)
               Ductile Cast Iron (GCD450)
 *Disc : Cast Iron (GC200)
               Ductile Cast Iron (GCD450) 
 *Stem : Stainless Steel (STS304, STS403)
 *Seat : Bronze Casting (BC6)
              Stainless Steel (STS304) 
  ※ The Other materials are available on request 
 
 

HDPE (High Density Polyethylene)
 
HDPE-Nonmetallic Penstock This Penstock designed for flow control in a water treatment area,
 a irrigation and spare area for a water works.  
  
 
Specifications 

1. Size 
  200mm~1500mm
 ※Other size are available on request. 
2. Working Pressure 
  Max. 10 mAq. 
3. Fluid 
  Water (freshwater, seawater) 
4. Main Material 
  Door Plate : HDPE
 Cross Support : STS304
 Support Block : HDPE
 Hinge Ass'y : ASS'Y
 Spindle : STS304
 Frame Plate : HDPE
 Guide Rail : STS304
 Upper Cross Binder : STS304
 Bottom Stopper : STS304
 Spindle Guide Ass'y : ASS'Y
 
5. Direction of Operating 
  Counter-clockwise to open 
 

Pin Jack Roller Gates

This gates designed for flow control and preventing reversal of flow in a river, a reservoir, a irrigation ditch and shore. 
  
 
Specifications(Standard)

1. Size 
  2000mm~4000mm
 ※Other size are available on request. 
2. Working Pressure 
  Max. 10mAq (20mAq and higher water level are available on request.) 
3. Fluid 
  Water 
4. Main Material 
  Skin Plate : SS400
 Support Beam : SS400
 Main Roller Ass'y : ASS'Y
 Side Roller Ass'y : ASS'Y
 Packing Ass'y : EPDM/STS304
 Rack Bar : SS400/S45C
 Upper Seal Beam : STS304
 Side seal Beam : STS304
 Support Beam : SS400
 Anchor Bar : SS400
 ※Other materials are available on request.
 
                                  Unit : mm