Features
· Dry type of operation without oil and water
· SIMPLE DESIGN
· Fast discharge of process gas due to shorter gas pass time in casing
· Using the screw type of rotor
· Lower rotation speed
Advantages to the Users
· Clean and pure without hunting in performance
· Easy to discharge of various solid process gases
· Various coating applicable to prevent from toxic, corrosive and condensate gases.
· Low utility cost - Easy maintenance / repair - Long life span of pump due to no touching between casing and screws.
· High volume efficiency
· Easy to install with C
· Flange and can reduce noise and vibration easily. No need to align the shaft.
Application
· Chemistry & Petrochemical
· Solvent recovery, evaporation, drying, molecular distillation, dehydration, degassing, dehyration, deodorization, Esterification, polymerization, forming, plasticizer, surfactant
· Food
· lyophilization, packing
· Electric & electronic
· Thin film deposition, ETCHER, ION IMPLANTATION, Encapsulation
· SPECIALTY CHEMICAL MANUFACTURING
· Producing pharmaceuticals
· Etc.
| Specification / Model No. | KDP 150 | KDP 330 | KDP 400 | KDP 800 | |
| Nominal Displacement (M/Hr) 50Hz/60Hz | 120/150 | 270/330 | 360/400 | 720/800 | |
| Ultimate Pressure (50/60Hz) | 1.3x10-2/ 6.6x10-3kPa(0.1/0.05Torr) | 1.3x10-2/ 6.6x10-3kPa(0.1/0.05Torr) | 4.0x10-3/ 1.3x10-3kPa(0.03/0.01Torr) | 4.0x10-3/ 1.3x10-3kPa(0.03/0.01Torr) | |
| Power Kw (50Hz/60Hz) | 3.7 / 5.5 | 7.5 / 11 | 11 / 15 | 19 / 22 | |
| Rotation (RPM) 50Hz/60Hz | 2900 / 3500 | 2900 / 3500 | 2900 / 3500 | 2900 / 3500 | |
| Port size | Suction (A) | 40 | 50 | 65 | 100 |
| Discharge (A) | 40 | 40 | 50 | 65 | |
| Gear Oil (l) | 1.3 | 1.6 | 2 | 4 | |
| Min. Cooling Water (l/min) | 4 | 8 | 11 | 20 | |
| Weight (Kg, Bare Shaft) | 220 | 310 | 400 | 600 | |
* Specifications are subject to change without notice to improve product quality.
KDP 150
* The above performance curves are subject to change according to the actual conditions of process.
KDP 330
* The above performance curves are subject to change according to the actual conditions of process.
KDP 400
* The above performance curves are subject to change according to the actual conditions of process.
KDP 800
* The above performance curves are subject to change according to the actual conditions of process.
| SIZE PUMP MODEL | A | B | C | D | E | F | G | H | I | J | K | L | Port Size(A) | |
| SUC | DIS | |||||||||||||
| KDP150 | 1238 | 1050 | 465 | 465 | 722 | 359 | Φ22 | 602 | 482 | 913 | 277 | 457 | 40 | 40 |
| KDP330 | 1520 | 1300 | 590 | 590 | 766 | 433 | Φ22 | 658 | 538 | 895 | 278 | 492 | 50 | 40 |
| KDP400 | 1573 | 1360 | 620 | 620 | 785 | 492 | Φ22 | 668 | 548 | 995 | 287 | 512 | 65 | 50 |
| KDP800 | 1750 | 1550 | 715 | 715 | 873 | 556 | Φ22 | 750 | 630 | 275 | 375 | 643 | 100 | 65 |
