HP-180P24
During extrusion work for steel or non-steel sheath peeling, this HP Series Inverter Preheater can greatly improve quality and productivity.
Applicable cables include: thin wires with high resistivity and high speed cable extrusion (preheating conductors).
When you peel off sheaths of steel or nickel wire or steel net wire, you need a preheater with high performance: the HP Series Inverter Preheater is the perfect solution.
HP-220P48
When you need preheating at 150 degrees on copper wires with a diameter of 2.5mm or less and the line speed is within the range of 500mpm~1500mpm, you need to choose an Inverter Preheater.
Depending on the cable type, you can save up to 20 types of work characteristics and you can also preheat at a consistent temperature.
The menus to be set: offset, Slope Value, Point to the output, Decel. Time, Accel. Time and more.
Product Specs
| MODEL | HP-12070CAP | HP-180P24 | HP-220P24 | HP-220P48 | HP-300P48 |
| Pulley | 120mm*3150mm*1 | HP-180P24 | HP-220P24 | HP-220P48 | HP-300P48 |
| Wire size | STEEL,CU,SOLID, STRAND | ||||
| 0. 2 ~ 1.5mm | 0.5 ~ 3mm | 0.8 ~ 4.5mm | |||
| Wire temp.Setting range | 0 ~ 299 ℃ | ||||
| Capacity | 220V 25KVA | 220V 7KVA | 220V 7KVA | 220V 15KVA | 220V 15KVA |
| Work frequency | 1000Hz | ||||
| Remotr control | 0 ~ 10V DC INPUT | ||||
| Capstan motor | Servo motor control | ||||
| Work volt | 0 ~ 7V | 0 ~ 24V | 0 ~ 24V | 0 ~ 35V | 0 ~ 48V |
| Power supply | 220/380VAC, 3Phase, 50/60Hz | ||||
| Steel/Line speed | Steel/1200 | Steel/500 | Steel/300 | Steel/500 | Steel/1000 |
| CU/Line speed | CU/2500 | CU/100 | CU/700 | CU/1000 | CU/2000 |
