1. Welding Ring
1) Ring type - Custom made / Al4047, 4045, BAg2, BCup3 / 1.2 Ø ~ 2.4 Ø / Circular, different type, Pipe type
2. Welding Rod
1) Rod type - Custom made / Al4047, Al4045, Al4043, Al5356, Al1100, BAg2, BCup3 / 2.0 Ø, 2.4 Ø, 3.2 Ø available
3. Welding Wire
Flux in wire
Torch Brazing of Al materials is usually performed by applying low temperature chlorine flux to the welding rod or ring of Al-Si alloy It was common to braze by gas fire, but this product has a fluorine flux in the welding wire, When the heat is received, the flux is melted first, and the aluminum oxide film is removed, so that the filler is easily filled by the capillary phenomenon.
Flux in wire features
- Welding condition is clean after brazing because there is optimum flux and flux.
-It can be easily adjusted to brazing temperature condition of flux and flux application products.
- Since flux is non-corrosive, it does not need to be cleaned after brazing.
- Flux fluidity is increased in parallel with the wire connection direction of the base material contact surface to increase the fluidity of the brazing material.
1) Wire type - Custom made / Al4047, BAg2, BCup3 / 1.2 Ø ~ 2.4 Ø
4. Other welding materials
PFC Type condenser, Radiator Clamp (4047)
PFC Type ring (2gun, 3gun)
- 2 gun Type material : Al 4047, AI 4045
- 3 gun Type material : Al 4047, Al 4045
Washer type ring
Special low temperature welding ring
