Specifications

  High impact shock
  mated connectors,wired with MIL-C-915/60 or/63 cable and equipped with
  straight environmentally sealed back shells,withstand high impact shock
  per MIL-S-901

  Vibration with Rear Accessory Loads
  mated connectors, with weights attached ti sinulate heavy rear accessories, withstand the following vibration levels:
  . Sine vibation per MIL-STD-202, method 204,condition G.
  . Random vibation per MIL-STD-202, method 214,condition ll,Letter J.

  Shielding Effectiveness,(SJD38999/46)
  .EMI leakage attenuation greater than 90dB at100 and greater than 65dB through 10 GHz.
  .Dynamic EMP protection greater than 90dB from 1 to 100 Mhz while subjected ti 3G2 / HZ random vibration.
  .Shell-to sell conductivity -1.0 millivolts maximum. (Class F and N).

Grounding Before contact Engagement (SJD38999/46)

Grounding fingers engage. 050 in. minimum prior to engagement of contacts, providing full rediation hazard and HERO
protection.

Temperature Range
Class C, F, Y and N:-65℃ (-85℉) to +200℃ (+392℉). Class W:-65℃(-85℉) to +175℃(+347℉)

Corrosion Resistance
Class C,Y and W withstand 500 hour salt spray. Class F and N withstand 48 hour salt spray.

  Fluid Resistance
  Connectors withstand specified immersions in MIL-L-7808, MIL-L-23699, MIL-H-5606, Chevron M2-V, Coolanol25,
  Gasoline, Ethyene, Glycol, Freon TMC, and other solvents and cleaning agents.

  Rear Accessory Threads
  Metric reae accessory threads provide increased strength and accept standard rear hardware. An uninterrupted
  rupted cylindrical surface is provided for environmentally sealed accessories.

Scoop-proof Design
Pin cotacts are recessed to prevent damage due to scooping by the mating connector shell.

  Pin-to-Pin Mating Protection
  Plug and receptacle cannot mate when both contain the same contact type. This prevents the failures possible with
  many other connectors,which permit pin to mate with pins,resulting in either lack of continuity or short circuits and severe
  mechanical damage.

Coupling Durabillty
Exceeds specifications requirements of 500 mate/unmate cycles.