LOGO

DHP

Heat exchanger manufacturer, plate heat exchanger, disk & sheel heat exchanger, spriral heat exchanger, plate coil and more
Name

Plate heat exchangers

Series Plate heat exchangers
Catalog dhp__121308_bgnubs-19MHDKL.pdf
Product Description

Plate heat exchangers
Innovative Plate Technology

Principle

Plate heat exchangers have more than 100 years history and its structure is composed of a fixed frame, a movable frame and corrugated plates which are in between the two frames.
Hot liquid and cold liquid go through between the corrugated plates in turn.
To prevent leaking, gaskets are mounted around the plates and tightening bolts are used to put the plates together.
There is heat transfer between the two liquids through the plates.
This is the main principle of a plate heat exchanger.
The arrangement of two liquids is that the cold liquid goes upward and hot liquid goes downwards in order to increase heat transfer efficiency. There is an advantage to use plate type heat exchangers over Shell & Tube type heat exchangers, that is to say, the corrugations in the plates reduces the liquid turbulence to a low Reynolds number and the liquids flow is counter current so that the heat transfer efficiency is always 3 ~ 5 times higher than Shell & Tube type heat exchangers.


Features

(1) High Heat Transfer Coefficients

DHP Plate Heat Exchangers provide high rates of heat transfer, due to the turbulence inducing shape of the plates.
The special gasket configuration of the plates prevents any mixing of the media being processed.
In the port area both fluids are separated by double gaskets. Additional safety is ensured by the leakage gap.


(2) Saving the installation space

Since the heat transfer efficiency is high, only 2-30% installation space is required comparing to the same capacity of the multi-tubular heat exchanger.


(3) Low contamination

Strong turbulent flow formed by the bump in flow way and short staying time of the fluid inside the heat exchanger will result in getting the effect to avoid scale adhesion.
Convenient disassembling and assembling. Cleaning is easy to handle the contamination in an efficient way.


(4) Minimum heat loss

Heat is emitted in the side of the plate type heat exchanger and because the space is not much required the heat loss can be minimized due to less heat generation volume even when insulation or heat insulating materials are not used.


(5) Applicability & standardization

All the components or parts are standardized and the compatibility of the parts is good.
Plate number can be increased or decreased depending on the change of the capacity.
Cleaning or replacement is easy when the plate or gasket is worn out.


Specification

Max. Operating Temperature190℃
Max. Operating Pressure20kg/㎠ (for high pressure 50kg/㎠)
Plate MaterialSTS304, 304L, 316, 316L, 317, AVESTA, 254SMO, HASTELLOY-B, C, Titanium, Ti-Pd, NLCP(Nickel), AL-BRASS
Gasket MaterialNitrile(NBR), HNBR, HYPALON, BUTYL, FPM, FPM-G EPDM(Ethylene Propylene Diene Methylene), Silicone Neoprene
Frame MaterialCarbon Steel, STS304, 316

Applications

FoodsMilk, juice, sugar solution, soy and sesame oil, liquor, beer, heating, sterilization/cooling for edible oil, etc., heat recovery, and CI P liquid heating
ChemicalPetroleum, paraffin, various acids, sulfuric acid, kerosene, salt sulfate, zinc, nucleic acid, polymerization process, soft water cooling, heating for glycerine, etc., condensing ethanol, etc.
TextileWashing water, NaOH solution, dyeing water cooling and waste heat recovery
Electric & electronicCirculating water, flushing coolant, transmission oil cooling, rectifier transformer, SCR cooling, high frequency heat treatment cooling, pure water treatment, electron tube cooling and blackening furnace cooling
Mechanical facilityMachineries cooling, emulsion, hydraulic oil, abrasive liquids cooling, compressor, industrial furnace cooling, transmission oil, autoclave water cooling and engine cooling
Ship-buildingCentral Cooling, Lub Oil, Jaket, Piston Water, Heavy Oil, Transmission Oil cooling, Diesel Oil, Heating Oil preheating
Steel IronMould cooling, cooling for continuous casting process, furnace, coking plant cooling, emulsion, ammonia water cooling, machineries, compressor cooling, washing oil cooling, hydraulic oil cooling, heat recovery for washing water and other waste heat recovery processing
Surface treatmentSulfate cooling, phosphate, heating/cooling for pretreatment process liquid of coating, heat treatment liquid cooling, galvanizing and chrome coating
Extraction processCrude Alcohol, Soy Bean Oil, Cooling for fatty acid, etc. and heating for coconut oil, edible oil, etc.
PharmacyCooling, heating and concentrating for extracting solutions, cream, sugar solution, emulsion, suspension, plasma, citric acid, etc.
Paper pulpWashing water, chlorine water cooling and waste heat recovery
Building equipmentsHeating, heating for hot water supply, heating and cooling for HVAC, etc., condenser, evaporator, heat pump cooling, hydraulic oil cooling and waste heat recovery
AutomobileCooling for heat treatment solution and cutting fluid, heating for pretreatment of coating and paint cooling for spray booth (Phosphatizing sol. cooling)
Fish tankFish tank sea water heating, waste heat recovery, incubator and fish farm
PlantIce thermal storage system, district heating plant, nuclear power plant and swimming pool