PS002(2HP BELT TYPE)
As motor and driving shaft are connected by belt for easy control, so this PASSON is good for laboratory.
Size:W420 X D750 X H790(mm)
Side of PS002 (2HP Belt Type)
As motor and driving shaft are connected by belt, vibration and noise are small so this PASSON is good for laboratory.
Size:W420 X D750 X H790(mm)
PS002 (2HP Direct Type)
As motor and driving shaft are connected by belt, vibration and noise are small so this PASSON is good for laboratory.
Size:W410 X D540 X H1200(mm)(size excluding pump)
Side of PS002 (2HP Direct Type)
As motor and driving shaft are connected by belt, vibration and noise are small so this PASSON is good for laboratory.
크기:W410 X D540 X H1200(mm)(size excluding pump)
Compatible Impeller
Depending on the materials’ characteristics and the desired outcome, various compatible impellers can be used.
Result of Rubber Dispersion
The results of dispersion of highly viscose liquid rubber only upon 1 pass with PASSON are given.
PS005 (5HP Special Lift Type)
This 5HP PASSON is comprised of a mixing unit, an electric lift and a controller in one.
Size:W900 X D900 X H1180(mm)
PS005 (5HP Special Lift Type)
This 5HP PASSON is comprised of a mixing unit, an electric lift and a controller in one.
Size :W900 X D900 X H1180(mm)
DOUBLE SEAL
This seal, one of the mechanical seals, is used to completely block leakage that may be experienced during dispersion of highly viscose material. This seal can be connected to coolant so as to prevent thermal damage to the seal face.
Compatible Impeller
Depending on the materials’ characteristics and the desired outcome, various compatible impellers can be used.
LOBE PUMP
This pump is used to transfer materials from the tank (or the hopper) to PASSON. The existing pump of yours can also be used with PASSON.
PS010 (10HP Special Tilting Type)
This 10HP PASSON is designed in such a way that, the mixing unit can be flipped over by rotating the handle to facilitate easy cleaning and re-assembly.
Size :W850 X D870 X H1180(mm)
Side of PS010 (10HP Special Tilting Type)
This 10HP PASSON is comprised of a mixing unit, a lift and a controller in one.
Size :W850 X D870 X H1180(mm)
DOUBLE SEAL
This seal, one of the mechanical seals, is used to completely block leakage that may be experienced during dispersion of highly viscose material. This seal can be connected to coolant so as to prevent thermal damage to the seal face.
Compatible Impeller
Depending on the materials’ characteristics and the desired outcome, various compatible impellers can be used.
LOBE PUMP
This pump is used to transfer materials from the tank (or the hopper) to PASSON. The existing pump of yours can also be used with PASSON.
PS020(20HP BELT TYPE)
The motor and the driving shaft are connected to each other by belt to facilitate easy change of gear ratio and maintenance.
This Product is for mass production.
Size :W800 X D1400 X H1530(mm)
Side of PS020 (20HP Belt Type)
The motor and the driving shaft are connected to each other by belt to facilitate easy change of gear ratio and maintenance.
This Product is for mass production.
:W800 X D1400 X H1530(mm)
DOUBLE SEAL
This seal, one of the mechanical seals, is used to completely block leakage that may be experienced during dispersion of highly viscose material.
This seal can be connected to coolant so as to prevent thermal damage to the seal face.
LOBE PUMP
This pump is used to transfer materials from the tank (or the hopper) to PASSON.
The existing pump of yours can also be used with PASSON.
Compatible Impeller
Depending on the materials’ characteristics and the desired outcome, various compatible impellers can be used.
