LM-T60
This equipment is used to print the surface during extrusion work.
It is mostly used for length printing or thermal carving of company logos or product type.
It is mainly used in PE/XLPE production lines and frequently used in the manufacturing process for high voltage cables or fiber optical cables.
When you print on PE or PVC pipes, you use a thermal carving marking machine. To maintain high accuracy while you work, you need to use an AC SERVO Motor for drawing.
LM-T1000
An LM Series Making Machine is used for length printing.
The length is usually printed in meters or feet.
You can use our meter/feet marking machine to print both meters and feet at the same time.LM-T1000 is a marking machine that can mark both units.
LM-T60DUAL
When you use the marking machine on the optical cable or high voltage cable, you must sometimes mark the length on both the top and bottom.
This is because you want to see the length from both sides since the cable is thick or too stiff.
In this case, you need a Dual Marking Machine. LM-T DUAL is designed for this dual side printing purpose.
Product Specs
| MODEL | LM-T60D | LM-T60 | LM-T50 | LM-T60FT | LM-T1000 |
| Marking type | Heating and stamp marking type | ||||
| Applicable | Product out diameter ∅10 ~80mm | ||||
| Usage | Length mark printing | Feet Mark | Meter and feed mark | ||
| Wheel drive type | Ac servo motor control | Torque motor | Ac servo motor control | ||
| Tape | White, AL coating tape | ||||
| Length measuring type | Belt counter | 500mm wheel counter | |||
| Active outputs | 1Pulse/meter open collector out | 1Pulse/Feet | 1Pulse/meter and feet | ||
