Injection Molding M/C for Rubber

Feature

- With selection of differentiated hydraulic system and electric system, even beginner can operate it easily.

- Using touch screen, it can set up easily the temperature condition and time etc. at each mold giving the number to each mold.

- Remained quantity of rubber maintain the condition of immature molding by cooling up to the nozzle range

- As heater single line equipment are installed inside, it’s possible to check whether each heater line is cut or not and whether heater operate right or not.

- It’s easy to replace the mold thanks to the ball transfer, installed in the low heat plate.

- By L.M bearing, fixed in slide, it can work smoothly.

- To save the power cost and for the precise control, it applied the electronic proportion control system.

Specifications

항목			형식
항목			DSIM- 150	DSIM- 250	DSIM- 300	DSIM- 450	DSIM- 650	DSIM- 1000
Clamping Force		ton	150	250	350	450	650	1000
Clamping System		ton	직압식 / HY.D-RAM
Injection Volume	ST’D	cc	1000	2000	3000	4000~ 6000	7000~ 10000	10000~ 16000
Injection Pressure(Max.)		kgf/cm2	1600 ~ 2000
Screw Diameter		mm	40	50	50	60	60	70
Screw R.P.M		rpm	0 ~ 120
Heating Plate	ST’D	mm	500×500	600×600	650×650	800×900	1000×1000	1200×1200
Day-Light		mm	550	600	700	800	900	1000
Clamping Stroke		mm	450	500	500	550	650	750
Min Mold Thickness		min.	100	100	100	150	250	250
Heating Plate Capacity		kW	12	15	18	28	38	46
Moter Power		kW	11	11	15	15	22	30
Total Electric Power		kW	30	32	38	53	70	90
Overall Dimension		m	1.7×2.5×3.0	2.0×2.5×3.4	2.0×2.7×3.7	2.5×3×4.0	2.7×3.0×4.3	4.2×5.5×5.5
Machine Weight		ton	7	8.5	10	18	23	46

NOTE.
These specifications can be changed without any previous notice for improvement of product quality.
These specifications are for 1 machines/1 set.
It’s possible to manufacture according to the specifications, demanded by customer.