| Summary | It is one of the key components in the organization of ultrasonic cleaners, which is the machine that supplies electric ultrasonic waves (KHz) required for cleaning to the vibration part. This means that the creature depends on the stability of the circuit configuration, the selection and the use of critical components, and a high level of expertise of production technicians. Therefore, the oscillation part in Hankuk (Korea) Ultrasonic Industry is an oscillator that mobilizes the experience and knowledge accumulated over many years and applies the merits of advanced countries’ products. Moreover, it is the safest and most suitable product for the work environment and conditions, which has been already highly appreciated in its excellence. |
| Division | The oscillator can be operated in a variety of working environments, and more importantly, its durability that can’t break down is really important part. It is highly regarded as the most stable and trouble-free product. The technical background reflects many of the superior merits of Japanese products. |
| Types | It is classified as one frequency designed for a given frequency, multi-frequency for accommodating various frequencies, and a high frequency for more than 100KHZ. It can be variously manufactured to be applied according to users’ needs, the type of material to be cleaned, and the goal of the completeness of cleaning |
| Features | 1. It needs to be installed in a place where there is no humidity, ventilation is good, and air in the atmosphere is as clean as possible. 2. It needs to be installed in the place near the vibration part as well as in the change of input power is minimal. 3. It needs to be installed in a safe place that is easy to operate, does not cause shocks, and is free of the danger of falling machine or heavy objects. 4. You need to check the voltage of input power and connect the electricity 5. After confirming that the detergent is supplied enough to the ultrasonic vibration part tank, you are allowed to turn on the S/W. 6. You need to frequently check whether or not the fuse at the power input terminal is in poor conditions 7. If the operation status of oscillation part is not good, please organize the details and then immediately contact the Technology Department in Hankuk (Korea) Ultrasound Industry. |
