A soot blower is system that effectively removes ashes or other attachments piled on the surface in contact with combustible gas such as boilers, fired heaters and other heat exchange devices.
Use of soot blowing contributes to enhancing heat efficiency and increasing the rate of facility operations. Soot blowers are needed by such facilities as power plant boilers, urban and industrial waste management facilities, fire heaters, denitrification facilities and desulfurization facilities.
Short Retractable Soot Blower
It is installed at safe section even if some section of lance tube is located in gas path at normal times.
This is because gas temperature of boiler and other facility is low.
It is widely used when they need to more powerful blowing than Rotary type soot blower. (Ex.: Economizer, tubular air, preheater, etc.)
It is basically same structure of LR-2B and nozzle arrayed as equidistant intervals at the plural sections and thus it is able to clean the whole sections of gas path with short transfer distance.
In case that sections are two , it is called half retractable.
Sections will be designed a lot if needed.
- Make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Lance tube selects proper materials for installation and operation conditions.
- Low noise operation with an enclosed reducer and carriage
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
Rake Type Soot Blower
It is efficient design to clean at large area with even and strong.
Plural rake arms are attached to retractable type lance tube and each arm is attached to multiple nozzles evenly.
(Applicable facilities are SCR, tubular air heater)
- Maximize construct stiffness with strong fame of box type.
- Minimize the movement silence and shake by Dual rack and pinion drive.
- Blowing that make forward and backward movement of lance tube with 1 motor.
- Maximize blowing efficiency by applying high efficiency ventri nozzles.
- Low noise operation with an enclosed reducer and carriage.
- Spray pressure control unit in Poppet valve enables to control the nozzle pressure.
- It is convenient for maintenance because each model of poppet valve is in common use.
