Cuber (turning of clamping basket while traveling, inverter-controlled)
A device that automatically stacks cured blocks onto stock pallet in a desired cube
Right-left synchronizing gear is used to prevent the cuber from inclining.
Traveling (up-down): 1,250 mm
Traveling (right-left): 2,000 mm
Cubing Pallet Feeder
A conveyor that transports pallets with cured blocks from lowerator to cuber, and empty pallets to pallet turnover
1,400 x 2 floors x 10 stages
15.5 m
Product Arranging/Remodeling Device (traveling speed controlled by inverter)
A device that rearranges cured blocks on the conveyor suitable for cubing
Clamping power: 1,000 kgf
Traveling distance (up-down): 500 mm; turning: 270?
1,100 mm x 1.5 m (conveyor); 1,100 x 1.5 m (no-drive roller)
Stock Pallet Magazine
A device that holds stock pallets and supplies them one by one to cuber chain
Stock pallet: 1,000 x 1,000 x 136 mm (1,150 x 1,150 x 136 mm)
Holding capacity: 15 stock pallets, 2,000 kgf
Slat Band Conveyor or Roller Conveyor
A conveyor that holds stock pallets with cubed blocks before they are moved to stockyard by a forklift.
1,000 mm x 8 m (in case of roller conveyor, distance between rollers: 100 mm)
Maximum load: 15 ton
Cuber Hydraulic Unit
Oil pump and driving part including motor are installed separately.
Pilot valve
Two pressure selection stages are available for cylinder operation.
Oil tank ventilator, oil temperature indicator, oil level indicator, oil filter for preventing contamination
Oil heater is installed on the hydraulic tank.
Oil cooler is installed on the pipeline through which oil returns to the tank. A compulsory ventilation fan controlled by temperature sensor is also installed.
A separator oil pump is installed on the oil cooler.
Tank: 800 liter
Maximum pressure: 120 kg/cm2
Normal pressure: 70 kg/cm2
Cuber Control
For control of transporting parts of the cubing plant
Modular PLC
One-touch screen allows monitoring of the automatic production process, simple input and output of data, and check of malfunctioning.
