LOGO

UNIFLO

Valve manufacturer, Butter fly valve, Ball valve, Control valve and more
Name

Control Globe Valves

Series Valves
Catalog uniflo_39555_uayxkb.pdf
Product Description

 

UNIFLO Control Valves provided superior performance in demanding control and tight shut-off process, and used for either throttle or on-off control of a wide variety of power plant, Gas & Oil, Water, Steam,. etc. includes high flow capacity & pressure drops, low noise, reduced maintains.

UNIFLO Control Globe Valves

Size1/2″ to 24″(DN15 … DN600)
RatingANSI 150Lb to 2500Lb
JIS 10K to 63K
PN10 to PN450
LeakageFCI 70-2
Standard : ANSI Class IV
Option : ANSI Class V
Press. Rangeup to 6,170 psi(g)
up to 434kgf/cm2
Temp. Range-150˚F to +1,050˚F / -100˚C to +565˚C
Option : -320˚F to +1,562˚F / -196˚C to +850˚C
Materials

Carbon steel(WCB,WCC), Stainless steel(CF8, CF8M, CF3, CF3M), 

Chrome-moly(WC6,WC9,C12A), other alloys

End ConnectionsNPT(BSFF), RF/FF/RTJ Flanged, Socket weld, Butt weld
ActuatorsSpring-diaphragm, Cylinder, Motorized, Electro-Hydraulic
Applications

Low Pressure Steam & Water, General Services, Flash Tank, Fuel Gas, 

Condensate Recirculation, Superheater and Reheat Spray, 

Desuperheater Water Spray, Gland Steam Pressure, Soot Blower, Steam Pressure,

Auxiliary Steam, Boiler Feedwater, Deaerator Pegging Steam, Deaerator Level Control, Turbinebypass(HP/LP)


 

Trim Type : Single Port, Conventional Cage, Single Stage, Multi Stage, Disc Stack

UNIFLO Control Globe Valves  1

 

UNIFLO Products incorporate the unique sealing & seating principle which is ideally suited for difficult process application including high cycle & temperature, ultra-cryogenic, high abrasive media, slurries ,.etc


UNIFLO Control Globe Valves  2

NoParts Description
1Body
2Bonnet
3Body Stud
4Body Nut
5Plug
6Seatring
7Window Cage
7-1Balance Cylinder
8Stem
9Plug-Stem
10Spacer
11Balance Ring
16Bonnet Gasket
17Seatring Gasket
18Packing
20Packing Follower Bolt
21Packing Follower Nut
22Packing Flange
23Packing Follower

 

UNIFLO Control Globe Valves  3

The body designs of UNIFLO Angle Control have bolted bonnet, over sizing stem & yoke type and also, trim designs have single port, conventional cage, single stage, multi stage type.

 

Size1/2″ to 8″(DN15 … DN200)
RatingANSI 150Lb to 2500Lb
JIS 10K to 63K
PN10 to PN64
LeakageFCI 70-2
Standard : ANSI Class IV
Option : ANSI Class V / ANSI Class VI (Soft)
Cv Range0.1 to 860
Press. Rangeup to 1,480 psi(g)
up to 104kgf/cm2
Temp. Range-150˚F to +1,050˚F / -100˚C to +565˚C
Option : -320˚F to +1,562˚F / -196˚C to +850˚C
Materials

Carbon steel(WCB,WCC), Stainless steel(CF8, CF8M, CF3, CF3M), 

Chrome-moly(WC6,WC9,C12A), other alloys

End ConnectionsNPT(BSFF), RF/FF/RTJ Flanged, Socket weld, Butt weld
ActuatorsSpring-diaphragm, Cylinder, Motorized, Electro-Hydraulic
Applications

Low Pressure Steam & Water, General Services,

Flash Tank, Fuel Gas, Condensate Recirculation, Superheater and Reheat Spray, 

Desuperheater Water Spray, Gland Steam Pressure, Soot Blower, Steam Pressure, Auxiliary Steam