JT-310 (CHIP COMPONENT AUTO TAPING MACHINE)
Features
•Product alignment & transfer(parts feeder & linear feeder)
•Loader -> Indexer part -> Inserter part
•NG detection / output part
•Controller(touch screen, Micom B/D)
Options
•Tester
•Measuring unit
•Vision
Configuration
•Stable high-speed operation
•Wide range of chip size application design
•Final inspection (blank)
•Easy and quick maintenance (self-diagnosis indication, concentrated alignment of major control check parts etc)
•High-speed measurement through stable interface with measuring instrument.
•Product-specific lower testing and measuring or up-down test and measurement system.(Low-resistance m§Ù, impedance IzI/¥È, inductance Ls/Q etc)
Connection
Specification
Applicable |
MLCC,Resistor,Inductor,etc |
|
Designated Work |
3225/3216/2520/2012/1608/1005 |
|
Throughput Speed |
Max.1300pcs/min at 1005-0.35t |
|
Carrier Tape |
8mm Embossed/Paper(opt) |
|
Carrier-tape |
Thickness |
Embossed : 0.25 |
Reel Size |
Embossed: OD340xID76x100w(TRV.) |
|
Bottom Tape |
OD240xID76x180W(TRV.) |
|
Cover Tape |
Embossed : OD210xID76x5.4 |
|
Direction of Wind |
CW (Right) |
|
Sealing Type |
Heat Compression |
|
Heater Temp. Control |
Adjust, PID Control |
|
Vacuum Source |
Vacuum Pump (Built-in) |
|
Power Source |
AC220V-1ph-60/50Hz |
|
Air Source |
5~9 kg/§²G |
|
Measurement System |
Lower Side by Both |
|
Dimensions |
1460Wx710Dx1350H |
|
Weight |
¾à 200kgs |