Features and Benefits

ㆍ10 high-intensity chip LED

ㆍTwo red LEDs flash at 20% to alert the "battery charge" warning signal

ㆍOne red LED flashes at 10% to indicate the battery charge is nearing

ㆍIt recognizes improper battery charge charging of the battery

ㆍWhen the key switch is turned Off/On, the memory in the gauge remembers and displays the charge status

ㆍOne red LED flashes when the battery voltage is kept at low voltage for 20 seconds

ㆍIt indicates the battery status (LED display: 100% ~ 10%)

ㆍAll LEDs are lit only when the battery is fully charged

ㆍLEDs are turned off one by one from the right as the battery charge status decreases

Configuration of Operation Switch

ㆍRespective main screens and 4 modes

ㆍModes can be changed using MODE button

ㆍTo inspect respective modes and items, use UP and DOWN button

ㆍThe parameters can be modified using SET button

Applications

ㆍGolf car

ㆍCommercial cleaning equipment

ㆍElectric bicycle

ㆍElectric forklift and electric carrier for farming, etc

Specifications

ㆍOperating voltage: 12V, 24V, 36V, 48V

ㆍOperating temperature: -20 ℃ to 85 ℃

ㆍStorage temperature: -30 ℃ to 90 ℃

Product Description

ㆍBDI is an easy to install, inexpensive device, reliable and accurate. It reads and displays the battery charge status

ㆍIt uses PCB with built-in IC and users can easily install it

Cautions

ㆍhe charging status of this product does not take into account the self-discharge effect, so it does not measure the battery according to the unused time

ㆍCharge and discharge time will vary according to Full and Empty setting values, depending on the battery specifications

ㆍFor further information, please contact us