Next generation Tetra technology
APT7000 is the world-first TEDS modem that was optimized to SCADA applications and achieved Tetra Interoperability Certificate from TCCA.
APT7000 utilizes the next generation Tetra modems on the existing 25kHZ narrow bandwidth. APT7000 comes in two versions supporting 380MHz and 410MHz, respectively.
| Function | Data/Messaging Services | Short Data Service(SDS) |
|---|---|---|
| Circuit Switched Data | ||
| Multi-slot Packet Data | ||
| Peripheral Equipment Interface (PEI) | ||
| Status messaging | ||
| Security Services | Authentication | |
| Air Interface Encryption : TEA1 & TEA3 | ||
| Security Class(Class 1, Class 2, Class 3) | ||
| GPS Services | Autonomous GPS support | |
| Position Information Sending | ||
| RF Specification | Air Interface Spec | ETSI TS 300 392-2 v3.4.0 |
| Bands | 380 ~ 400MHz | |
| Bandwidth | 25KHz | |
| Data Rates | 115.2 Kbps(when 64QAM mode) | |
| RF Power | 1W(Hardware 3W Ready) | |
| Receiver sensitivity(static) | -112dBm(PM), -114/-107/-102dBm(4/16/64QAM) | |
| Receiver Sensitivity(dynamic) | -103dBm(PM), -109/-104/-100dBm(4/16/64QAM) | |
| GPS | Mode of Operation : Autonomous or assisted(A-GPS) Sensitivity : -152dBm | |
| Standard | Dimensions H x W x D(mm) | 160 x 115 x 56(with heat-sink) |
| Weight(g) | 650 | |
| Input power | DC 12V | |
| Antenna | Road type(Size TDB) | |
| Service Environment | Interface | 2 UART ports Antenna connector(SMA type) : TETRA & GPS DC Input |
| Operating Temperature ℃ | -20 to +55 | |
| Storage Temperature ℃ | -30 to +75 | |
| Humidity | ETS 300 019-1-7 class 7.3E |
