Information
NAD4000 Series metal detector detects even the smallest metal
particles safely and reliably in every type of aluminum-packaged
products.Compared with X-Ray scanners, NAD 4000 Series overcomes
the high density differences in product or high evaluation thresholds
due to variations in the production process. The intelligent, passive
magnetic surface sensor works without wear, contrary to X-Ray
scanners, and is easy to operate as the systems works without X-Rays.
Wet and salty products such as cheese and meats do not affect
detecting performance. Wires, chips and broken injection needles are
reliably detected irrespective of product orientation.
Features
- Dual Sensor Type (More Stable Higher Accracy)
- Wider Conveyor Width Selection (250, 350 & 500 mm)
- Without hazardous X-rays
- Wear - free detecting system
- No need to care about "product effect & hot temperature"
- Usable with every type of aluminum packaged products
- Configurable Passing Height (Min.50~Max. 150mm by every 10.0mm), (For 250& 350mm Conveyor width only)
- Password Setup Function
- Low investment and maintenance cost
- No need to be certified or inspected by government law
- Product orientation does not influence the signal strength
- Easy to learn & No need to train an operator
- Connectivity to Various External Devices
- Manageable Metal Detecting History
- Easy Software Update
Outputs
> AC Output: 4 ports / 24V Output: 4 ports
Power Supply
> Single Phase (110 to 220V) & Three Phase (220 to 380V and etc.,)
> Free Cycle (50/60Hz)
> Fuse (3A)
Operating Temperature
> 0℃ to 50℃
(advised to use the machine under normal temperature)
NO | Description | Material |
---|---|---|
1 | MAGNET | . |
2 | DUAL SENSOR | . |
3 | CONVEYOR FRAME | SUS304 |
4 | CONTROL BOX | SUS304 |
5 | MOTOR | . |
6 | TOWER LAMP | . |
Application
| ||||
|
|
|
|
|